Important Pagespewag Links

Configurators

Locations

Contact

pewag International › Products › Conveyor technique › Roller chains & sprockets › Gall chains

Gall chains DIN 8150

Standard length in bundles of 5 m

Sprockets on request

Gall chains with division up to 60 mm inclusive have welded plates
from a division of 70 mm with straight plates.
Gall chains from a division of 50 mm are riveted with U-disks.

Gall chain according to DIN 8151 - light version - on request!

Bookmark this on Delicious

Gall chain with end link fittings

Gall chain with connecting pin

Chain no.	Pitch	Inside	Pin		Plate		No. of plates	Connecting	End link fittings				Breaking	Weight
	p	width						pin					force
		b1	d1	d2	g1	s		e1	u1	u2	g3	d3	min.
	mm	mm	mm	mm	mm	mm		mm					N	kg/m
G 15	15	12	5	4	12	2	2	26	20	11	18	9	5.000	0,70
G 20	20	15	8	6	15	2	2	32	25	12	20	10	12.500	1,10
G 25	25	18	10	8	18	3	2	41	30	15	25	12	25.000	1,75
G 30	30	20	11	9	20	3	4	57	40	18	30	14	40.000	3,40
G 35	35	22	12	10	26	3	4	60	45	21	35	16	60.000	4,50
G 40	40	25	14	12	30	3	4	65	50	24	40	18	80.000	4,70
G 45	45	30	17	14	35	3	4	69	55	27	45	22	100.000	6,40
G 50	50	35	22	18	38	4,5	4	96	60	30	50	26	150.000	10,60
G 55	55	40	24	21	40	6	4	114	65	33	55	32	200.000	15,50
G 60	60	45	26	23	45	6	4	119	70	36	60	36	250.000	18,00
G 70	70	50	32	28	55	6	6	156	85	42	70	40	375.000	33,50
G 80	80	60	36	32	60	6	6	170	100	51	85	50	500.000	38,20
G 90	90	70	40	36	70	7	6	199	120	60	100	60	750.000	53,00
G 100	100	80	45	40	80	7	8	238	140	72	120	70	1.000.000	76,60
G 110	110	90	50	45	90	7	8	250	160	84	140	80	1.250.000	90,00
G 120	120	100	55	50	100	8	8	276	180	96	160	90	1.500.000	112,00

pewag group

Terms & Conditions . Privacy Protection . Imprint . Contact . Sitemap