360° rotatable lifting point. The load ring is 180° movable and can be held at each requested position due to its replaceable and patented spring. Likewise interchangeable is the hexagon-special screw of grade 10.9 material, which is secured against loss. The screw is 100% crack-tested as well as covered with a chromate VI-free protection against corrosion, and marked with WLL and thread size. It can be tightened with a hexagon wrench or spanner wrench.
The lifting points pewag winner profilift beta are marked with an individual serial number, that allows product traceability and load capacity for the most inappropriate field of operation, which explains the increased WLL in the upright loaded position. In permissible fields of operations the lifting point corresponds to a 5-fold safety. pewag winner profilift beta is available with metric or UNC-thread, whereas the lifting points with metric thread are also obtainable with customized thread lengths. The table with the different load capacities depending on the method of lifting as lifting gear, number of legs and angle of inclination is a part of the user manual and packed together with each lifting point.
Permissible usage
Load capacity acc. to the inspection certificate respectively table of
WLL in the mentioned directions of pull
Non permissible usage
When choosing the assembly make sure that improper load can not arise, e.g. if:
• the direction of pull is obstructed
• direction of pull is not in the foreseen area
• loading ring rests against edges or load
The load ring must be placed in the direction of pull before loading
– do not turn under load. For more details please have a look into
our user manual.
To calculate the necessary thread length (L)
L= H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
In case of requesting a lifting point with a special thread length,